Skip to main content

Fabric roses from scraps


We all love roses. Isn't it? I too...this is what we made last week.
Fabric roses from Scraps
Believe me, these roses are made from fabric scraps



If you love this and want to make your own, then you will  require  
  1. fabric scraps of any length. Cut them 1.5" wide.
  2. flower making strings.
  3. green tape.
  4. matching threads
  5. Scissors.
  6. sewing machine(not shown in the picture). Just you have to sew a straight line and not more than that.


 procedure...

To make fabric tube:
The main step is to make fabric tube using the scraps. You can do this in two methods. I have explained both the methods, you can follow which ever is easy to you.

Method 1: 
step 1:   
Fold the scrap 1/4 inches on both the sides and press them                                   


 step 2:
Again fold it as shown in the figure and press it.



step 3: 
Sew a straight line along the folded edge. Now the fabric tube is ready to make the rose.


Method 2:
 step 1:
 Fold the scrap and sew a straight line along the edges as shown.

                       

Step 2:
Turn the fabric tube inside out using any sharp objects. Usually I use my knitting needle. 
                          
Step 3:
Press the tube flat and the fabric tube is ready. 


Procedure to make rose
Step 1:
The method is same as used to make roses from satin ribbons.
  1. Hold the fabric as shown in the picture.
  2. Fold the ends left and right alternatively.
  3. Holb the fabric tube firmly and pull only one end of the fabic tube, till you get the shape of the rose.


Step 2:
Cut the remaining fabic tube. Knot it with the matching thread.






Step 3:
  1. To make stem, cut the wire to the required length.
  2. Tie the wire, with the rose using the matching thread.
  3. Wrap the green tape around the wire.

Now the rose is ready to decorate your vase


This rose can be used in many ways. They can used in the neck line in girls tops, to decorate hair clips and so on...You creative ladies will find more to do with this roses.

Note: I am linking this post to the parties here

Update:

Featured at:



They are talking about me at CraftGossip.com


Popular posts from this blog

Banded yoke top/frock tutorial

The draft contains two part, the yoke and the body. It is open at back for easy in and out. It is easy to make. Any one who knows how to finish a neck line can make this top/frock. Here I have made a frock, to see how the top looks click here.

Take a basic draft for top.

Measure the shoulder, here it is 2.5 inches. Mark a band around the neck with the width 2.5 inches as shown in the picture. Cut the band, this is the yoke and the other part is the body. Preserve the body part we need it later.


TO MAKE THE YOKE

FIGURE-A  (click to view larger) Fold the yoke as shown in the picture. Keep the yoke on fold(4 layers, this will result 2 yoke pieces). Mark it with 1/4 inch seam allowance. Cut it. This should result an oval as in the picture FIGURE-B (Click to view larger) Keep the pieces such that right sides faces each other and stitch along the outer edge as in the picture. After stitch the outer edge, the yoke band looks as in picture 2 Make  some  cuts along the outer edge. Turn the band to the …

This little tree is the Queen of the forest

This week  they are celebrating  children's day   in my daughter's school.  This tree costume is for the fancy dress competition . 
 In the top I have used two different shades of brown for the body and sleeve. I painted with fabric colors to make it look like the trunk of the tree.


Then I stitched the top. For the pant I managed with the brown color tracksuit.

The branches and leaves were not that much easy to make. I first made it with a thermocol.

In this I made a mistake, you can notice one side is very thin than the other. when I fix this in her face to check whether it fits, it break down. The thermocol is not very flexible.Then I made the other one with cardboard and chart paper. It will be easy to paint in the chart than the cardboard. So I pasted the chart over the cardboard.

 and painted with fabric colors, outlined it with black.


I also attached a cord behind it, so that it can be  tied  around the head and hands.

update:
I am linking this to Artsy-Craftsy Jan-2011

Terracotta jewellery making and baking - Tutorial

On seeing the beauty of the terracotta jewellery sets on the net, I wished to make one. Making a set is  easy for me but baking process is something difficult. Many said to bake it in an oven or kiln, I don't have either.
 One lady in a television program said to bake it in microwave oven. Hey... I have a microwave.  So I made a jhumki  and pendant and  baked it in microwave... but it was a disaster, it busted. Then I keep on searching the net and finally got one tutorial.
This time I kept the designs very simple since I am not sure about the out come. I don't want to waste my efforts. But  it was a success. It really worked and I made my first terracotta jewellery set.
 Thanks for the person who shared this. I can not find that link now but the tutorial in this link also uses same technique. You can go here and check for the tutorial Edited: All details about making, baking and painting terracotta jewellery is here....
https://www.youtube.com/playlist?list=PL9P99TIJ7qgzPlgo-nrSwkqR…